Using NetGear router, you can organize
connect local area networks with different protocols and types
data exchange, to connect one or more computers
Internet, to carry out communications networks in different offices of the
ISDN, with video clips, music or graphics, high -
permit real-time via the WWW, as well as
at the same time exchange data and to talk on the phone.
Installing the router is operating
on Windows or Mac OS through user-friendly and understandable
menu commands.
Routers NetGear support either locally or
remote control.
NetGear router can use multiple channels
connection to increase network capacity. If traffic
increases, the two B-channels 64 kbit / s, using Multilink
PPP, merged into a single channel so that the speed of data exchange
will be 128 Kbps. If your network happens decline
Traffic, one of the B-channels free. Using analogue
port, you can release one of the B-channels for telephone
connection. When your network using efficient compression
speed data exchange can be increased up to 512 Kbps.
You can pay on time, ISDN connections,
while intensifying NetGear router connection only
for the transfer of useful information and, if there is no activity
users of the network itself is completing a communication session.
When failure of any details of the router Bay
Networks will replace you with all your device. You can exchange
broken router to a new, just to your
vendor products Bay Networks.

Router NetGear RT 210
Ends LAN (Ethernet (10BASE-T), RJ45), ISDN (S / T,
RJ-45 through the external NT1) or analog (RJ-11 to
phone / fax / modem).
RS-232 port for management and configuration.
Protocols WAN: PPP, Multilink PPP.
Routing Protocols: TCP / IP, IP RIP-1.
Support of standard protocols, including PAP, CHAP and
caller ID.
hardware data compression.
FLASH-built memory.

Fast Ethernet Switches

Switches in this series are ideal devices
for segmenting your network. Any of the switches
FastEthernet allows you to connect segments to increase
Productivity network. Each Fast Ethernet switch ports
automatically detects the speed of data exchange, while
directly connected server / user, as well as any segment
network can easily move from the speed of 10 to 100 Mbps. All
NetGear Fast Ethernet switches can support
half and a full and automatic modes
transition from one regime to another. Switches support both
called regime switching cut-through ( "on the fly) and
store-and-forward (with intermediate buffering).

The switch Fast Ethernet FS 102
Two 10/100Mbit/s port UTP with automatic
speed.
support and a full automatic alignment
mode ports.

The switch Fast Ethernet FS 104
four 10/100Mbit/s port UTP with automatic
a certain speed.
support and a full automatic alignment
mode ports.

The switch Fast Ethernet FS 508
Eight 10/100Mbit/s UTP ports with automatic
a certain speed.
support and a full automatic alignment
mode ports.
automatic mode switching
cut-through ( "on the fly") for store-and-forward (with intermediate
buffering), handshaking.
integrated power supply.