Switches NetGear - it is inexpensive solution to the problem
overloading the network. Using technology plug-and-play,
which automatically configures your switch by
providing each station dedicated lanes and filtration
Traffic from other segments, reduces the number of conflicts and
expand the effective bandwidth.
Switches NetGear designed so that one of them
Ports can be automatically configured to transfer rate
Data, 10 or 100 Mbps, while the rest work at speeds of 10
Mbps.
If you use dial-up ports you will not be
need to make any changes to the installation program
on the workstation or the configuration of network adapters for
in an attempt to enhance the effective bandwidth and improve
network performance and to thus working
Station dedicated band 10 Mbps access to servers and
other resources in your network.
Switches NetGear support the so-called regime
Switches cut-through ( "on the fly) and the regime of intermediate
buffering - store-and-forward. In the cut-through
guaranteed minimum delay, a mode store-and-forward
guarantees filtering packets with errors. You can choose
one way of switching, just looking at data
loaded network.
All switches can support a full NetGear
and half-duplex modes. When your telephone switch in
Full band mode for dial-up connections
doubles from the simultaneous reception and transmission. For
Each port, you can select a full or
half-duplex mode, simply switch to using
front panel switch.
When failure of any details switchboard Bay Networks
replace your device. You can exchange broken
switch to a new, simply contact your dealer
Product Bay Networks.

Switch SW 108
Eight 10Mbit / s ports 10BASE-T UTP
support full-duplex.

Switch SW 502
One 10 Mbps port with automatic 10BASE-T/AUI/BNC
determining the type of environment.
one 10/100Mbit/s port UTP with automatic
speed and switch between the Normal / Uplink.

Switch SW 507
Six 10-Mbit / s ports 10BASE-T UTP.
one 10/100Mbit/s port UTP with automatic
speed and switch between the Normal / Uplink.

Switch SW 510
Eight 10Mbit / s ports 10BASE-T UTP.
Two 10/100Mbit/s port UTP with automatic
speed and switching on the floor / or a full
Full operation of ports.

Switch SW 518
Sixteen 10Mbit / s ports 10BASE-T UTP.
Two 10/100Mbit/s port UTP with automatic
speed and switching on the floor / or a full
Full operation of ports.